Last seen: Feb 25, 2026
I guess this problem is not related to ASTER. In this case, a solution to each specific problem can be found in google.Is there a problem when ASTER i...
The settings will be saved if you change them while ASTER disable.
Before buying equipment for a large number of locations, I would advise you to first test the operation of the programs you will be using. on any avai...
It is necessary to disable ASTER.To do this, use one of these methods.Then, after the PC boots up in normal mode, send a "debug system report" from A...
Is the device visible in the manager, when it stops working?First of all, you need to check the operation with the ASTER disconnected.Also, in the pow...
Contact technical support from GUI ASTER.This will also send a technical report, so the controller must be connected to the PC.
Look for Explorer crash entries in the system log. The program causing the crash may be listed there. It may be some kind of add-on for the explorer, ...
Remove parameter "oldFashionBoot" = dword: 00000001in the branch [HKLM SYSTEM CurrentControlSet Services MUTENX_SERVICE]
Use Ctrl+F12
Try to assign different IPs in ASTER settings.* Keyboard / Mouse can be switched between workplaces using Ctrl + F12
try apply the "AllGPUAccess" special settings and check GTA after reboot PC
It is better to solve such problems directly with technical support.Submit a technical report (type System debug information) directly from the ASTER ...
Try applying the chklevel100 registry patch.Workplaces tab -> System section -> right click on the icon of system case -> Special settings -&...
Are you using the latest version of the program?
Configure the resolution after disconnecting ASTER and rebooting the PC